How To Find Mac Address On Ricoh Printer

This department describes the user tools in the Network bill of fare nether Interface Settings.

Machine IPv4 Accost

Specify the car's IPv4 network address.

The default setting is [Auto-Obtain (DHCP)].

When you select [Specify], enter the IPv4 address and subnet mask as "xxx.xxx.xxx.thirty" ("10" indicates a number).

When you lot select [Specify], brand certain that IPv4 address is unlike from that of other machines on the network.

The physical address (MAC address) also appears.

IPv4 Gateway Address

A gateway is a connection or interchange point between two networks.

Specify the gateway accost for the router or host figurer used as a gateway.

The default setting is "0.0.0.0".

Automobile IPv6 Address

Displays the machine's IPv6 network address.

Link-local Address

The machine's specified link-local address appears.
Manual Configuration Address

The machine'southward manually configured address appears.
Stateless Address: ane-five

The specified stateless accost appears.

IPv6 Gateway Address

Displays the machine'southward IPv6 gateway address.

IPv6 Stateless Address Autoconfiguration

Specify IPv6 Stateless Address Autoconfiguration.

The default setting is [Active].

DNS Configuration

Make settings for the DNS server.

The default setting is [Auto-Obtain (DHCP)].

When you select [Specify], enter the DNS Server IPv4 address as "xxx.xxx.xxx.30" ("x" indicates a number).

DDNS Configuration

Specify the DDNS settings.

The default setting is [Active].

IPsec

Specify the machine'due south IPsec office Active/Inactive.

The default setting is [Inactive].

Domain Proper noun

Specify the domain name.

The default setting is [Auto-Obtain (DHCP)].

When y'all select [Specify], enter the domain name using up to 63 characters.

WINS Configuration

Specify the WINS server settings.

The default setting is [On].

If [On] is selected, enter the WINS Server IPv4 accost as "30.xxx.xxx.xxx" ("x" indicates a number).

If DHCP is in utilize, specify the Scope ID. Enter a Telescopic ID using up to 31 characters.

Effective Protocol

Select the Protocol to use in the network.

The default setting for "IPv4" is [Active].

The default setting for "IPv6" is [Inactive].

The default setting for "NetWare" is [Inactive].

The default setting for "SMB" is [Active].

The default setting for "AppleTalk" is [Agile].

NCP Delivery Protocol

Select the protocol NCP delivery.

The default setting is [TCP / IP Priority].

If you lot select [IPX Only] or [TCP / IP Merely], you lot cannot switch the protocol even if you cannot connect with information technology. If "NetWare" in "Effective Protocol" is set to [Inactive], you can simply use TCP/IP.

NW Frame Type

Select the frame type when you use NetWare.

The default setting is [Auto Select].

SMB Computer Name

Specify the SMB computer proper noun.

Enter the computer proper noun using up to xv characters.

"*+,/:;<>=?[\]|. and spaces cannot be entered.

Do non set a computer name starting with RNP and rnp.

Use uppercase messages for alphabets.

SMB Work Group

Specify the SMB piece of work group.

Enter the estimator proper noun using upwards to 15 characters.

"*+,/:;<>=?[\]|. and spaces cannot be entered.

Apply uppercase letters for alphabet.

Ethernet Speed

Set the access speed for networks.

The default setting is [Auto Select].

Select a speed that matches your network environment. [Auto Select] should usually exist selected.

	10Mbps Half Duplex	10Mbps Full Duplex	100Mbps One-half Duplex	100Mbps Full Duplex	Auto Select
10Mbps Half Duplex
10Mbps Full Duplex
100Mbps Half Duplex
100Mbps Total Duplex
Automobile Select

IEEE 802.1X Authentication for Ethernet

Specify the IEEE 802.1X hallmark for Ethernet.

The default setting is [Inactive].

For details well-nigh IEEE 802.1X authentication, see "Configuring IEEE 802.1X".

Restore IEEE 802.1X Authentication to Defaults

You can render the IEEE 802.1X authentication settings to their defaults.

For details nigh IEEE 802.1X authentication, run into "Configuring IEEE 802.1X".

LAN Type

When yous have installed the Wireless LAN interface unit, select the method of connection.

The default setting is [Ethernet].

[LAN Blazon] is displayed when wireless LAN board is installed. If Ethernet and Wireless LAN are both connected, the selected interface has priority.

Ping Command

Cheque the network connectedness with ping command using given IPv4 address.

If you lot fail to connect to the network, check the following, and so retry the ping command.

Make sure that "IPv4" in [Effective Protocol] is ready to [Active].
Check that the automobile with assigned IPv4 address is connected to the network.
There is a possibility that the same IPv4 accost is used for the specified equipment.

Permit SNMPv3 Advice

Set the encrypted communication of SNMPv3.

The default setting is [Encryption / Cleartext].

If yous select to [Encryption Only], y'all need to set an encryption password for the machine.

Allow SSL / TLS Communication

Set up the encrypted communication of SSL/TLS.

The default setting is [Ciphertext Priority].

If you set to [Ciphertext Only], you need to install the SSL certificate for the car.

Host Name

Specify the host proper noun.

Enter the host proper name using upwards to 63 characters.

Machine Name